BH-BT-1500A
This product is a balcony micro energy storage product, which includes a battery pack, photovoltaic controller, and display controller. It is used in conjunction with photovoltaic panels. When there is sufficient sunlight, the battery is charged first. After the battery is fully charged, it supplies power to the load of DC devices such as micro inverters. When the sun cannot provide sufficient sunlight, it automatically switches to the battery for external discharge, achieving the function of adding energy storage to micro inverters. Through the display screen, the characteristics of photovoltaic input power and battery pack power can be viewed. At most, two PV inputs are connected to solar panels with a voltage of 12-60V, and one DC output is connected to an XT90 interface. The load device is connected through an extension cable. In addition, when the battery pack power is insufficient, capacity expansion can be achieved through external power packs, allowing for micro scale expansion
The capacity of the energy storage system has increased.
Characteristic
Flexible combination of solar light according to the actual balcony scene
Volt component. Optional 100 W,200 W flexible components or optional
Choose 100 W,205 W,325 W glass components that can be paired with
Different balcony installation brackets.
Modular energy storage design, flexible configuration, supporting old and new
Mixed use, parallel connection, higher available power.
The electricity consumption for power generation is at a glance, and the optimal utilization of household energy Stabilize every critical moment.
Equipped with an intelligent energy distribution system. The system can be based on
Automatic adjustment of grid connected output power based on household load conditions
Maximizing the utilization of PV and energy storage energy for household use
Load provides energy services to save electricity for households Ben.
Parameter
Input characteristics
PV INPUT | ||||
MIN | STANDARD | MAX | NOTES | |
Vdc/V | 12 | 48 | 60 | Recommend using photovoltaic panels with an open circuit voltage of 60V |
Max Input Current/A | - | 20*2 | - | |
Max input short-circuit current/A | - | 30*2 | - | |
Max Input Power/W | 1500 | |||
Max tracking efficiency/% | 99 | |||
Under voltage protect/V | 10 | 10.5 | 11 | Automatically recoverable |
Input undervoltage recovery/V | 11 | 11.5 | 12 | Using board terminal voltage as a reference |
Over voltage protect/V | 61.5 | 62 | 62.5 | Based on the voltage at the board end, it can automatically recover |
Input overvoltage recovery/V | 59.5 | 60 | 60.5 | Using board terminal voltage as a reference |
temperature protection/℃ |
105 | When the temperature of the MOS transistor exceeds+85 ℃, it begins to derate. When the temperature reaches 105 ℃, it saturates and stops outputting. When the temperature returns to+70 ℃, it resumes operation | ||
PV input channels | 2-way | |||
PV input interface | MC4 | |||
Activation method | Button activation, PV charging activation | |||
sleep mode | Button sleep, delayed automatic sleep | |||
Parallel expansion | Supports up to 4 power packs with the same voltage platform and capacity | |||
Switch button | 1, long press to turn on, long press to turn off | |||
communication port | Connect Wi-Fi module | |||
Dimension
Host size | LWH:550* 150*290mm |
Sub package size | LWH:550* 150*235mm |
weight | Host: Net weight 21.8kg Sub package: Net weight 18.8kg |
Stacking method | Stacked against the wall, with the host on the top layer and the secondary package on the bottom layer |
Connection method | The hidden wiring slot is hidden on the left side for easy removal of wiring, and can be seamlessly connected with the electrical wiring slot |
Recommended
BDN800
POWER : 600W/700W/800W
BDN800
1. The latest WiFi + Bluetooth module enables wireless communication, eliminating the need for a dedicated gateway and offering flexible and convenient configuration. This greatly reduces operational issues caused by system failures, simplifies the system by eliminating equipment such as DC combiner boxes, distribution cabinets, and inverter rooms. The microinverter becomes the brain and steward of the power station, incorporating advanced and mature communication technology to manage the entire photovoltaic power station's data and information through wireless channels, reducing the cost of manual on-site maintenance and ensuring optimal station operation.
2. Modular design and standardized products ensure higher system reliability with patented topology.
3. Maintenance-free inverters: IP67 protection rating ensures good resistance to wind, sand, and salt spray, eliminating the need for regular dust cleaning and dustproof mesh maintenance. It also reduces the use of vulnerable components, eliminating the need for regular replacement of items such as fuses and fans., designed for maintenance-free operation.
4. AC-side to grid with physically isolated dual-switches enables thorough grid isolation.
5. Include protection functionality for relay faults and reverse connections of L, N, and earth lines, ensuring system integrity and safety.
6. Micro power generation - generating electricity with over 3W, even on overcast or rainy days, extending daily power generation by 2 hours.
7. Global sales with no patent risks.
8. Truly achieve high-voltage isolation of primary and secondary sides, with true 4kV high-voltage isolation between DC and AC sides.
9. Relay contact detection level and relay failure detection function.
10. Each PV interface has PV module leakage current detection, greatly enhancing system safety.
11.Hardware non-destructive grid reset (patented technology).
See more 
BDN400
POWER : 300W/350W/400W
BDN400
1. The latest WiFi and Bluetooth module enables wireless communication, eliminating the need for a dedicated gateway and offering flexible and convenient configuration. This greatly reduces operational issues caused by system failures, simplifies the system by eliminating equipment such as DC combiner boxes, distribution cabinets, and inverter rooms. The microinverter becomes the brain and steward of the power station, incorporating advanced and mature communication technology to manage the entire photovoltaic power station's data and information through wireless channels, reducing the cost of manual on-site maintenance and ensuring optimal station operation.
2. Modular design and standardized products ensure higher system reliability with patented topology.
3. Maintenance-free inverters: IP67 protection rating ensures good resistance to wind, sand, and salt spray, eliminating the need for regular dust cleaning and dustproof mesh maintenance. It also reduces the use of vulnerable components, eliminating the need for regular replacement of items such as fuses and fans., designed for maintenance-free operation.
4. AC-side to grid with physically isolated dual-switches enables thorough grid isolation.
5. Include protection functionality for relay faults and reverse connections of L, N, and earth lines, ensuring system integrity and safety.
6. Micro power generation - generating electricity with over 3W, even on overcast or rainy days, extending daily power generation by 2 hours.
7. Global sales with no patent risks.
8. Truly achieve high-voltage isolation of primary and secondary sides, with true 4kV high-voltage isolation between DC and AC sides.
9. Relay contact detection level and relay failure detection function.
10. Each PV interface has PV module leakage current detection, greatly enhancing system safety.
11.Hardware non-destructive grid reset (patented technology).
See more
BH-BT-1500A
POWER : 800W~1500W
BH-BT-1500A
This product is a balcony micro energy storage product, which includes a battery pack, photovoltaic controller, and display controller. It is used in conjunction with photovoltaic panels. When there is sufficient sunlight, the battery is charged first. After the battery is fully charged, it supplies power to the load of DC devices such as micro inverters. When the sun cannot provide sufficient sunlight, it automatically switches to the battery for external discharge, achieving the function of adding energy storage to micro inverters. Through the display screen, the characteristics of photovoltaic input power and battery pack power can be viewed. At most, two PV inputs are connected to solar panels with a voltage of 12-60V, and one DC output is connected to an XT90 interface. The load device is connected through an extension cable. In addition, when the battery pack power is insufficient, capacity expansion can be achieved through external power packs, allowing for micro scale expansion
The capacity of the energy storage system has increased.
See more
